Is your Samsung Galaxy smartphone showing the error message “Moisture has been detected” and a water drop image in the status bar? Or similar message showing moisture detection on Samsung Galaxy device. You can fix it very easily. There are multiple things you can do to fix ‘Moisture detected in charging port’ in Samsung Galaxy phones.
Samsung Galaxy Note 8 and newer Galaxy Note version smartphones and S7 and newer versions of S series smartphones and some Galaxy A series have an IP68 rating. Ingress Protection rating is known as IP rating. It means that your Galaxy smartphone is equipped with protection from water, dust, and dirt. These galaxy smartphones with an IP68 rating means your device can be submerged in water up to 1.5 meters for a max of 30 minutes yet it will be safe ad protected from water damage. These Samsung Galaxy phones have moisture detection sensors, that make the users alert when it detects moisture.
Below find the list of Samsung Galaxy devices that has an IP68 rating:
Note: The solutions described in this post to fix the “Moisture Detected” Error on Samsung Galaxy are applicable to all the Samsung Galaxy smartphones that have an IP rating.
- Samsung Galaxy Note 20 Ultra 5G, Galaxy Note 20, Galaxy Note 10 Plus 5G, Galaxy Note 10 Plus, Galaxy Note 10, Galaxy Note 9, Galaxy Note 8.
- Samsung Galaxy S21 Plus, Galaxy S21 Ultra, Galaxy S20, Galaxy S20 Ultra, Galaxy S20 Plus, Galaxy S10, Galaxy S10 Plus, Galaxy S10e, Galaxy S9, Galaxy S9 Plus, Galaxy S8, Galaxy S8 Plus, Galaxy S7, Galaxy S7 edge.
- While Samsung Galaxy S10 5G got an IP69 rating, the high-end smartphone Galaxy Z Flip and Galaxy Fold have no IP ratings. Some Galaxy A and M series phone’s newer models too have started getting IP ratings as well.
So, when the moisture detection sensors detect moisture, to safeguard your Samsung Galaxy device from short-circuiting its shows the error messages on your screen with suggestions. While this ‘Moisture Detected’ error message is visible, your phone won’t allow charging from the USB port to protect your device.
Depending upon your Samsung Galaxy phone model, you can see different types of ‘moisture detection’ error messages:
This message pops up when ‘Moisture detected on Samsung S9 Plus.’
Check charger/USB port When moisture is detected on Samsung Galaxy S20, Galaxy S10, Galaxy S21, and Galaxy Note 10, you will see a tiny water drop on the status bar with a notification message showing suggestions on what to do.
The tip you can see on the screen:
Is Moisture Detection On Samsung Galaxy Phones An Error?
If your Samsung phone has an IP68/67/69 rating, that implies the manufacturer used seals, gaskets, and adhesives to keep moisture and water out of the device. Mesh grilles cover everything, including the speakers in the gadgets.
By now, we have all heard about the potentially lethal rivalry between electricity and water. If your Samsung Galaxy device’s charging port is damp or humid, it could cause a short circuit, damage the device and render it useless.
The notice “Moisture detected” is not an error; it’s a precautionary measure to keep your Samsung phone safe. Moisture sensors cleverly prevent smartphones from charging if they detect even a small amount of moisture.
How To fix Samsung phone’s Moisture Detected Error
What steps you should take, when your Samsung phone alerts you about moisture has been detected?
Check to see if your Samsung phone is really wet.
The first obvious thing you need to do is inspect your Samsung Phone USB port, the charger, and the charging cable. See if they are wet or moist by water. Even though you might have not exposed your phone to water your Samsung phone, the charging port can get moisture from the moisture in the air. If you find your Samsung Phone USB port, the charger, and the charging cable any of these are wet.
Follow the solutions given below and fix Moisture Detected Error
Solution: Dry Your Samsung Phone
Gently clean your Samsung phone with a soft and dry cloth. You have to make sure your phone is completely dry. If the phone isn’t dry, it will give you an alert to disconnect, when you connect your phone with the charger to charge it.
- If this happens, you can speed up the drying by pointing a fan or dryer (cool air only) toward the charging port, so that the air evaporates the moisture completely.
- You can make a narrow swab using cotton or thin cotton cloth and a toothpick made of plastic/wood. Now take that swab and gently wipe the phone’s charging port.
- Submerge your moist Samsung Galaxy phone in dry rice overnight but if your phone got wet in seawater don’t put it in rice because salty water gets sticky and will not be that effective. If you can get a bag of silica gel which can submerge your phone that will work more effectively than rice. Silica gel will absorb moisture quickly and effectively in comparison to rice.
What To Do If Dry Samsung Phone Shows Moisture Detected Error
If the error “moisture detected” persists despite cleaning and wiping the USB ports dry, and you are still unable to charge your Samsung Galaxy phone, consider the following solutions:
1. Switch Off the Phone: After you have cleaned, wipe, and completely dried your Samsung phone, and yet if it says moisture detected. You can switch off the phone and then connect it with the charger and your phone will start charging.
2. Use Wireless Charger: If your Samsung Galaxy has a wireless charging feature, use a wireless charger to charge your phone till the moisture detected error goes away.
3. Force Stop Android: Go to Settings, there search for Android System. Open Android System App info and then tap the Force stop After that connect your phone with the charger and it should start charging.
4. Deactivate Fast Charging: You may get rid of moisture-detected alerts on your Samsung Galaxy phone by turning off the fast-charging feature. To turn off fast charging, follow the steps given below.
- Open Settings
- Then go to Device maintenance or Device care
- Open Battery and select Charging
- Finally, tap on the toggle switch and turn off Fast Charging.
5. Clear Cache partition: Clear Cache partition on Samsung phone in Recovery Mode to fix false alert of ‘Moisture detection on Samsung’.
6. Boot Samsung Phone In Safe Mode: As you know in Safe Mode you can diagnose your phone to know if an issue or error is caused by a faulty App. So, you can boot your Samsung Galaxy phone in safe mode and then charge your phone. If the phone doesn’t show the error ‘Moisture detected’ in safe mode, it means an app in your Samsung phone is the culprit that caused this false alert. You can uninstall the app you think might be causing the error and get rid of the false alert of ‘Moisture detected’ on your Samsung phone.
Also Read: Samsung Screen Broken? Here How To Unlock!
7. Android Repair: Android Repair is computer software that can fix the ‘Moisture Detection’ error from Samsung Devices if it’s being caused by any software issue. So, if you have checked and are sure that your Samsung Galaxy is completely dry as a bone, yet it’s showing the moisture detected error you can try Android Repair and fix the issue. So, go ahead download and install the Android Repair and give it a try. The Android repair fixes all software-related issues like app crashes, can’t open the camera, false moisture detection, etc. from any Android phone. Step by step user guide on how to use Android Repair.
Download Or Buy Now Android Repair
You Might Also Like:
- How To Fix Instagram App Crashing On Android- 11 Effective Solutions
- Samsung Galaxy A52/A51/A42/A32 Battery Draining So Fast? Here How To Fix!
- How To Fix Android Phone Won’t Connect To Wi-Fi [ 5 Possible Fixes]
- Download Pending Error On Play Store? Here Is How To Fix It
We hope by now you would have tried the fixes explained above and you got rid of moisture detected notification from your Samsung phone. However, if your Samsung phone is still showing the “Moisture detected” error after trying every fix we have described in this article, then it’s time for you to get your Samsung Galaxy phone to Samsung’s authorized service center and get it fixed.